This is a LORA model of Not Blackpink - Rose Flux1.D v1.0. Lora Member Only. It should work well with flux1-dev-fp8.safetensors.
Using Forge-UI : https://github.com/lllyasviel/stable-diffusion-webui-forge
Tested settings :
Lora weight : 0.8-1 | Sampling Steps : 25-30 | Distilled C...
This is a LORA model of Not Twice - Momo v2.5 Short Blonde. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, Tissue...
This is a LORA model of Not IVE - Wonyoung Flux1.D v1.0. Lora Member Only. It should work well with flux1-dev-fp8.safetensors.
Using Forge-UI : https://github.com/lllyasviel/stable-diffusion-webui-forge
Tested settings :
Lora weight : 0.8-1 | Sampling Steps : 25-30 | Distilled CFG...
This is a LORA model of Not NMIXX - Sullyoon Flux1.D v1.0. Lora Member Only. It should work well with flux1-dev-fp8.safetensors.
Using Forge-UI : https://github.com/lllyasviel/stable-diffusion-webui-forge
Tested settings :
Lora weight : 0.8-1 | Sampling Steps : 25-30 | Distilled C...
This is a LORA model of Not G-IDLE - Miyeon Flux1.D v1.0. Lora Member Only. It should work well with flux1-dev-fp8.safetensors.
Using Forge-UI : https://github.com/lllyasviel/stable-diffusion-webui-forge
Tested settings :
Lora weight : 0.8-1 | Sampling Steps : 25-30 | Distilled CF...
This is a LORA model of Not IVE - Wonyoung v2.6. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, TissueMix_Eternit...
This is a LORA model of Not BABYMONSTER - Asa v2.2. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, TissueMix_Eter...
This is a LORA model of Not Racegirl - Judaha v2.5. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, TissueMix_Eter...
This is a LORA model of Not Actress - Chun Woohee v2.5. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, TissueMix_...
This is a LORA model of Not Miss A - Suzy Flux1.D v1.0. Lora Member Only. It should work well with flux1-dev-fp8.safetensors.
Using Forge-UI : https://github.com/lllyasviel/stable-diffusion-webui-forge
Tested settings :
Lora weight : 0.8-1 | Sampling Steps : 25-30 | Distilled CFG ...
This is a LORA model of Not Twice - Tzuyu Flux1.D v1.0. Lora Member Only. It should work well with flux1-dev-fp8.safetensors.
Using Forge-UI : https://github.com/lllyasviel/stable-diffusion-webui-forge
Tested settings :
Lora weight : 0.8-1 | Sampling Steps : 25-30 | Distilled CFG ...
This is a LORA model of Not Izone - Minju Flux1.D v1.0. Lora Member Only. It should work well with flux1-dev-fp8.safetensors.
Using Forge-UI : https://github.com/lllyasviel/stable-diffusion-webui-forge
Tested settings :
Lora weight : 0.8-1 | Sampling Steps : 25-30 | Distilled CFG ...
This is a LORA model of Not Fromis_9 - Jiwon v2.7. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, TissueMix_Etern...
This is a LORA model of Not Aespa - Giselle v2.7. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, TissueMix_Eterni...
This is a LORA model of Not Actress - ZhouYe v2.5. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, TissueMix_Etern...
This is a LORA model of Not Actress - Wang Ou v2.5. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, TissueMix_Eter...
This is a LORA model of Not Model - Leeesovelys v2.5. Lora Member Only. It should work well with any photorealistic models. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Adetailer : face_yolov8n.pt
Checkpoint : TissueMix_Cutie, TissueMix_Ultra, TissueMix_Et...
This is a LORA model of Not Actress - Jeon Somin v2.5. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Ka...
This is a LORA model of Not Aespa - Karina Flux1.D v1.0. Lora Member Only. It should work well with flux1-dev-fp8.safetensors.
Using Forge-UI : https://github.com/lllyasviel/stable-diffusion-webui-forge
Tested settings :
Lora weight : 0.8-1 | Sampling Steps : 25-30 | Distilled CF...
This is a LORA model of Actress - Ema Kisaki Flux1.D v1.0. Lora Member Only. It should work well with flux1-dev-fp8.safetensors.
Using Forge-UI : https://github.com/lllyasviel/stable-diffusion-webui-forge
Tested settings :
Lora weight : 0.8-1 | Sampling Steps : 25-30 | Distilled C...
This is a LORA model of Not Aespa - Winter v2.5. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
This is a LORA model of Not Cheerleader - Ha Jiwon v2.5. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE ...
This is a LORA model of Not TripleS - Jiyeon v2.0. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras...
This is a LORA model of Not Aespa - Ningning v3.0. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras...
This is a LORA model of Not Youtuber - Zuyoni v2.0. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karra...
This is a LORA model of G-IDLE - Yuqi v3.0. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras
Ade...
This is a LORA model of Not SNSD - Taeyeon v3.0 Natural. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE ...
This is a LORA model of Not G-IDLE - Miyeon v2.5. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE Karras<...
This is a LORA model of Not Cheerleader - Mok Nagyeong v2.5. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M ...
This is a LORA model of Not Youtuber - Kim Chaerim v2.5. Lora Member Only. It should work well with any photorealistic models, You'll get best results with a LORA weight 0.7-0.9, Steps: 20-50, Sampler: DPM++ 3M SDE Karras, CFG scale: 3.5-8. This lora have correct body weight also.
Tested settings :
Lora weight : 0.8-1
Sampling Steps : 25-30
CFG : 3.5-4
Sampler : DPM++ 3M SDE ...