Hello everyone!
Today I have uploaded on MMF and GoogleDrive the Sentinel and Wild Saber Panther Pose 2. I had a few printing problems with the model and I had to resupport and send to the printer again.
There are two versions of the sentinel with and without helmet, 4 head options for the Saber Panther (2 from the previous release, they are compatible).
I have updated the Sen...
2022-01-21 17:09:00 +0000 UTC
View Post
Hello everyone!
Update January 23th
Can't believe I could finish him today, but it's done. I am currently preparing files to put him in the printer later tonight.
The pose was not the one I was imagining because his Ears got in the Way, I lost my morning trying but I gave up and went with this pose.
There will be 2 versions of Him, Mohawk, and Bun....
2022-01-19 21:00:35 +0000 UTC
View Post
Hello everyone!
Update January 19th
After struggling a lot with the pose I decided to go with this pose for the rider, the right hand is ready to go for a weapon swing the left one is balancing the rider holding a shield but it also looks good with an alternative weapon. If mirrored and using different weapons or even the same weapons, could be like a charging pose ...
2022-01-18 17:36:49 +0000 UTC
View Post
Hello everyone!
Today I have created the first welcome pack. This pack will consist of past releases, if you missed you should be able to download them on MMF.
I haven't prepared a group picture and haven't fixed it on Googledrive yet because I thought that having those miniatures are more important than pictures.
I was planning to update this in February but it's available no...
2022-01-16 17:53:39 +0000 UTC
View Post
Hello everyone!
Today I am organizing the files to release 3 miniatures:
DOTG_SylanaiWildleaf
DOTG_Unmounted SentinelA
DOTG_Unmounted Sentinel B
There are only 3 releases but, 5 minitures. I had some failed supports on the back of one miniature and I had to redo (it's good to use but not for me to promote, at least the back). Since I had to reprint, I mirrored the ...
2022-01-16 14:19:54 +0000 UTC
View Post
Hello everyone!
I am here to announce the result of the poll selection and what is going to happen to each option
Here is the link:
Next Theme Selection | Imagine Minis on Patreon
With 27 votes, the next theme will be Defenders Of The Glade Part 2. I expect to start this theme in February and ...
2022-01-15 10:33:59 +0000 UTC
View Post
Hello everyone!
Update:
I have added the images of unmounted Sentinel A & B, B was fast because an Idle pose is a bit more simple to make, but in the end, it's a solid choice.
Both of them are modular and compatible with weapons released previously, the weapons used are only examples. They also have unmerged heads so you can swap or repose them using blend...
2022-01-13 18:21:33 +0000 UTC
View Post
Hello everyone!
I went back into the Defenders of the Glade theme, and the first miniature was the unmounted Sentinel, I decided to make a different thing (not that different thou), so I have created Sylanai Wildleaf.
She is the Elder sister of Merion Wildleaf and also the Captain of the Sentinels guarding the glade outpost.
I created her pose using the spear in Mind but, look...
2022-01-12 18:59:40 +0000 UTC
View Post
Hello everyone!
I have finished printing the 32mm standing position, I was thinking on making different posts but decided to make only one.
The files are now available on Googledrive.
I will be uploading them on the store later today and should send to you guys tomorrow on MMF.
The balcony version has a 32mm scale model
Best regards,
Ivo
2022-01-10 15:05:10 +0000 UTC
View Post
Hello everyone!
We are almost there.
I have placed her on the printer to test print yesterday but my supports were not strong enough and I had a failed print. Never seen something like this, her leg snapped during print and took the whole model with it, added a few more supports, and sent it to the printer again.
If everything goes well I will be releasing her tomorrow.<...
2022-01-10 11:42:42 +0000 UTC
View Post
Hello everyone!
It's time to start our poll to decide the January Patron Commission Model.
This model will be delivered at the beginning of February and will be available only during February. After that, it will become only available through loyalty reward (Instead of a monthly release, and will not be sold at the store).
The poll consists of 7 subscribers from Patreon and 2 ...
2022-01-10 10:39:14 +0000 UTC
View Post
Hello everyone!
The test print is on the printer. I will upload it on google drive and MMF as soon as I like the print result.
She comes with:
60mm round base, the render version as in the split. As for extras, I have added a 32mm version of her in the sitting pose, a capeless body (It will require something to fill the gap between the balcony and her butt).
Off-...
2022-01-08 15:08:41 +0000 UTC
View Post
Hello everyone!
UPDATE: All Slots have been filled, now I am waiting for day 10 to open the poll. Those that have taken the slot have until the 9th day to fill the request.
It's time for another Patron Commission Request!
Before you continue reading the post check if there are 7 comments before you (if there are, then, all the slots have been taken), and write...
2022-01-06 02:01:00 +0000 UTC
View Post
Hello everyone!
Update January 8th
I have created a monster! Hahaha this is by far my most daring project lol.
The build plate is completely full with a single miniature, 6cm Base, the character is taller than 75mm because she is in the 75mm scale (for a Human), I guess I should scale her a bit down to leave her a 75mm size instead 75mm scale... too late for r...
2022-01-04 14:28:50 +0000 UTC
View Post
Hello everyone!
Sorry for the delay but, I am back and I will start the December Patron Commission ASAP. I will manage time to make things right.
Something came up this weekend, so here is what is happening behind the scenes:
Well, the thing is, I got a little bit more support and sales than what I was expecting (I'm not complaining here, I am quite happy), this extra support ...
2022-01-03 17:51:57 +0000 UTC
View Post
Hello everyone!
This is the last report of the year, it's impressive how fast time flies! So many things happened this month so I think this will be a long post.
This was a special month decided only by-poll, each miniature was requested by a patron and voted on an open poll, and things were so dynamic that I had no time to get references before starting to sculpt but it was awesome...
2021-12-31 14:00:06 +0000 UTC
View Post
Hello everyone!
I was thinking of adding this post to the monthly report but in the end, I decided to create a separate post for this because it might be too much info to add to the report.
I know that the poll is open but even still It's pretty much decided.
I want to keep releasing them as I finish sculpting and test printi...
2021-12-27 22:01:58 +0000 UTC
View Post
Hello everyone!
I wish you all a Merry Christmas!
If you missed one Patron commission/Loyalty reward I have sent them to you as a Christmas gift on Minihoarder! If you don't have an account, don't worry, there is a feature added in the last month where Minihoarder will wait for you to create an account to complete the delivery.
The last time we spoke about MMF and Minihoarder,...
2021-12-25 14:09:57 +0000 UTC
View Post
Hello everyone!
It's time to start our poll to decide the December Patron Commission Model.
This model will be delivered at the beginning of January and will be available only during January. After January it will become only available through loyalty reward (Instead of next January, as the poll is pretty much decided).
The poll consists of 7 subscribers from Patreon and...
2021-12-23 14:29:33 +0000 UTC
View Post
Hello everyone!
Today I have cleanned her. She is now available in the Early access google drive folder.
Since I was using a mixture of resins and the miniature turnued out to be a light gray, when taking pictures with the black background it was hard to see details.
Looking at the printed miniature a few small details are so tiny almost hard to see, so my guess is that if you...
2021-12-23 14:13:25 +0000 UTC
View Post
Hello everyone!
Update: all 7 slots taken.
Since this month we had the Special Patron Commission during the whole month, opening a request post felt kind of wrong since I was still sculpting miniatures and people could ask for the same miniature, so I decided to open this request a bit later than usual.
There are 7 requests slots to go to the Commission Poll, to decide which w...
2021-12-21 14:00:06 +0000 UTC
View Post
Hello everyone!
Update 22nd December
Almost there! Just finished the final sculpting. Now I will manage the files, support, and test print.
I was supposed to finish her but the idea I had in mind for her hands did not work out as I would like so I kept trying and later on I abandoned part of the idea. In the end, I have placed a spell on her left hand as...
2021-12-19 22:24:17 +0000 UTC
View Post
Hello everyone!
Today I have uploaded The Fallen Prince in the early access folder.
His supports were without a doubt my best so far, guess I have learned a lot with the Female Elf Archer Hero. Of course, it's far from perfect and I still have a lot to learn.
Best regards,
Ivo
2021-12-19 12:31:29 +0000 UTC
View Post
Hello everyone!
With the Fallen Prince printing, I reached what was planned initially 3-4 miniatures, and right now there are 2 day left of sculpting to shift my activities into promotion and render material but, I guess I am all fired up for one final push, after that, I will take a break.
That being said, let's not waste more time and announce the winner of the next poll result!
2021-12-18 23:34:45 +0000 UTC
View Post
Hello everyone!
I have done a bit of exploration on MMF and I am ready to share what I figure out from the platform. We have to decide which platform to use and what can happen, each has its advantages and disadvantages.
MMF review
Creating user groups is a simple task and I can attach files to it really simple and easy after I got the hang of things.
2021-12-16 19:05:46 +0000 UTC
View Post
Hello everyone!
UPDATE:
Thanks, everyone for the feedback!
I have figured out why, but I don't agree with the process, I will open a support ticket, to see what can be done to improve.
The thing is, MMF has Group and Subgroup,
My idea was to make Group based on tiers and I attach miniatures according to those tiers
And subgroup would be the source Patre...
2021-12-15 12:50:20 +0000 UTC
View Post
Hello everyone!
Yesterday I have finished uploading all fantasy miniatures on MMF and today I have paused the Patron commission sculpt in order to open the store and put a price tag over the miniatures.
I won't lie, it was a pain to deal with MMF structure. Yes, it is a beautiful interface but, all the commands I need to manage my sculpts are inside them. Even to group them up I had...
2021-12-14 17:27:59 +0000 UTC
View Post
Hello everyone!
I have added the Night Elf Archer Hero to the Early Access folder.
I have printed those miniatures using those supports, the way they are they work just fine (a bit hard to remove but doable).
I will change the flying stand, the way it is, it's small and all but a bit hard to glue on the base and easy to miss (almost threw mine away thinking it was support mate...
2021-12-14 12:41:09 +0000 UTC
View Post
Hello everyone!
Update December 18th
And done! Finished the Fallen Prince. I have managed to position the sword in a different way so I added modular hands to him. I am managing the files, soon I will do supports and should be printing him tonight and he should be cleaned tommorow.
Update December 17th
We are almost there! Made a simple ...
2021-12-13 19:11:26 +0000 UTC
View Post
Hello everyone!
I kept thinking about what should I improve for 2022, the list is big. There are so many things I wish to do.
Let's start with miniatures:
I got feedback from many of you about the miniatures released as Patron Commission, it will take a whole lot of time to give them again (1 year), that's too much time. To compensate ...
2021-12-13 16:50:49 +0000 UTC
View Post
