Imagineminis

The Dark Council - Miz'la, The Queen Of Lust (Render)

Hello everyone!

Miz'la is printing again, while I wait, I started creating the Renders. She will be uploaded on MMF as soon as possible.

Miz'la is the last miniature from The Dark Council Theme, a set of 7 Dreadlords.

She comes with 2 body options with both Winged and Wingless options, it's possible to customize her by removing certain pieces of armor using Blender or other 3d...

The Dark Council - Miz'la, Queen of Lust (Pin-up,WIP)

Hello everyone!

So, I decided to make a Pin-up... lol.

She was supposed to have volume and be Queen of Lust but, without a proper pin-up, it felt wrong, so I am working on it.

She won't have modular arms, and it will be possible to remove her armor parts using blender, but I will put 2 versions Armor and skimpy (also winged variations, to a total of 4 options).

Since add...

Tribes one Year anniversary

Hello everyone!

Tribes is celebrating 1 year anniversary (Not me though, I have only 7 months of Tribes), to Celebrate this, MMF will make a Frontier with many creators like me that are part of the Tribes. It should go live in the next few days.

What is this Frontier? To be honest, I don't know lol... but they requested me a Month of Tribes release.

From my knowledge, Frontier...

New Tier - Chronomancer

Hello everyone!

This has not been a good month in terms of subscriber growth, I get one and lose another, so it felt as if I was running in the same spot. Many people join because they only wish for the Loyalty rewards and while sleeping with this thought in mind, I came up with one idea, a new Tier, The Chronomancer.

Well, the Chronomancer is a Time spell caster, and this Tier coul...

The Dark Council - Miz'la Hand Option (Gelvain, WIP)

Hello everyone!

Update September 26th

Finished Gelvain sculpture, and Miz'la Hand Option. You will be able to print Gelvain Separately or as a "pet" the chain should be glued to his back since I didn't want to make holes in him I left the chains kind of subjective.

Sorry, I was planning to finish this over the weekend but I had a rough weekend and I could not ...

Patron Commission - September 2022 (Poll Result)

Hello everyone!

The poll has ended and it's time to announce the winner!

This month's winner is... with 29 votes we have a tie lol.

Classic WC3 Lich and Maiev Shadowsong

Unfortunately, I am only one and I can only do one of those, so to break this Tie the first to be requested wins, therefore Classic WC3 Lich and will be our first miniature for October.

This will b...

The Dark Council - Miz'la, Queen of Lust (WIP)

Hello everyone!

Update September 23th

Finished Miz'la but she won't be available for now. I will pose Gelvain and make one last hand of Her.

I chose 2 body options but, it's possible to go beyond that and remove more armor pieces using blender (I left those as a separate object). For a Pin-up maybe I should include.

Update September 21th...

The Dark Council - X'Avon and Bat Swarm (Now available)

Hello everyone!

Today I have added on MMF The Dark Council - X'Avon, The Wingless and The Dark Council - Bat Swarm.

With this release the set of Dreadlords has grown to 6, one more to finish the theme.

Best regards,

Ivo

#3dprintedminiature 2022-09-18 19:32:19 +0000 UTC View Post

The Dark Council - Bat Swarm (Test print)

Hello everyone!

This miniature was not planned as a release but, when I finished X'Avon's bat cape I realize that I had some nice bats and why not make a bat swarm with it, and so I did.

I created 3 bat swarms using the bat models, clumping the bats without losing their reality (too much intersection) and also keeping them together after 3d printed was a challenge but I think it loo...

The Dark Council - X'Avon, The Wingless (Test Print)

Hello everyone!

Sorry for the delay, my resin ended (I have around 50g remaining) so I decided to print with the newer resin and calibrated my printed, after 6 calibration Matrix I found little change among them and 0.6s was working fine to my eyes... silly me lol. So, I printed this guy with 0.6s per layer, only to realize that I had nothing on the build plate on the following day except...

The Dark Council - X'Avon (Testprint Feedback)

Hello everyone!

Today I have finished printing X'Avon, as you can see in the picture there are support flaws, so I will need to print him again. Support failures, both arms, chin, and horns.

I haven't printed a miniature and wished to redo something until now... The cape looks fantastic in the 3d and also when printed but, it's too thick, meaning that it would waste too much resin o...

The Dark Council - X'Avon, The Wingless (Render)

Hello everyone!

I have finished the model and every additional piece, now it's time to export the assets and make supports.

This time it will take a while to do this. There are 3 body options (Capeless, Cape, and Batcape). To minimize my supporting time I will see if I can split the cape models and take the cape as a separate print, This way instead of supporting everything again I ...

Change Artstyle

Hello everyone!

Today I was browsing some other artists work and stumbled on a recent launch by Artisan Guild, so I compared the model with one I did.

Looking at my most recent models, especially female Elves (Dark Ranger and Conquest) It's possible to see that their bodies are too thin, of course for an Elf that makes sense but for a miniature, I think they look small.

The tr...

Live

Hello everyone!

I was invited to join in a Live from @thingsi3dprinted on Instagram,  although I'm not a painter I will join the live and Paint a miniature while talking (I'm neither good with English speaking nor good at painting) let's see how it goes.

If anyone wishes to join, you are welcome.

Best regards,

Ivo

Patron Commission - September 2022 (Poll)

Hello everyone!

It's time to help decide what will be made as Patron Commission.

• The requests are listed by the order in which they were made, except that I will change the order of the platforms so that it's not unfair.
• The most voted model will be available in October for Patreon, Apoia.Se. November for Tribes and Minihoarder subscribers.

The poll consis...

The Dark Council - Tok'zreth, The Loreseeker (Available now)

Hello everyone!

Tok'zreth is now available on MMF.

She comes with 3 body options already pre-supported; you can also remove a few armor parts to customize yours (adding a different shoulder for instance).

There 3 hand options included, you can mirror before printing to use L/R.

She was printed using gamer resin, on an Elegoo Mars 2 Pro with Layer 0.02mm.

Best regar...

The Dark Council - X'Avon, The Wingless (WIP)

Hello everyone!

Update September 13th

I Finished posing, and for him, I chose a Low stance with a wide stance, this was to give an idea of a side dash. All the cloths will be going in the opposing direction to give the idea of motion. 

Now I will fix mesh parts damaged by moving, and pose the hands, and face (I will add a grinning teeth expression).

Loyalty Rewards 03 & 06 Months

Hello everyone!

Today I have delivered the miniatures for those that have been supporting me for the past 03 & 06 months. The miniatures are available on MMF to download in Objects shared with me.

This month:

03 Months: 05 Patrons

06 Months: 0 Patrons

Those that received theses miniatures before where not included because they should already have access to them...

The Dark Council - Tok'zreth, The Loreseeker (WIP)

Hello everyone!

Update September 07

Finished detailing body armor pieces. I will now sculpt the wing's fingers and then pose the model. It was not in my plans to make modular hands for her but I guess I will do it, but due to the Armor structure, the cut will happen in the middle of the arm.

For now, I am thinking of a big spell, and staff but I will also incl...

Patron Commission Request - September 2022

Hello everyone!

EDIT: All Slots have been taken!

Before you continue reading the post check if there are 8 comments before you (if there are, then, all the slots have been taken), and write down "Imagine this!", after doing that, you reply to this post (or not), and then continue reading. Posting this will reserve your slot, you can describe your re...

Patron Commission August - Dark Ranger (Now Available)

Hello everyone!

The Dark Ranger is now Available on MMF. You should be able to download her under the objects shared with me. If you have any problems, please let me know.

Cleaning tip: Remove the supports of her Eyebrows and bowstring before pulling, they are thin and might break.

She was printed using Elegoo Mars 2 pro, with Layer 0.02mm.

My opinion: I reall...

Monthly Report - August 2022

Hello everyone!

Today is the last day of the month, and it's time for another report.

In terms of production, this month happened according to the initial plan except that I have changed TDC_Tok'zreth, The Loreseeker for Nyd'la and I also found a bit of time to add a repose for a model, making it more useable for some of you.

This month I had a branding problem but I am sortin...

TDC - Miz'la, The Queen of Lust - Outfit

Hello everyone!

As stated in the previous post, I need your help to decide Miz'la Outfit.

If you haven't seen the outfit, check this post: The Dark Council - Miz'la, The Queen of Lust (WIP) | Imagine Minis on Patreon

What I am requesting is your opinion to help me decide on her outfit, I am ...

The Dark Council - Miz'la, The Queen of Lust (WIP)

Hello everyone!

Well, I am not starting Miz'la just yet, I have to finish the Dark Ranger but, I wanted to know your opinions about my design decisions. Unfortunately, I can't add a picture to a poll so I had to create this to show exactly what I am talking about before you guys vote.

Miz'la is Lust, therefore I think that nothing is more suitable for her than a pin-up. While thinki...

Patron Commission August - Dark Ranger (WIP)

Hello everyone!

Update September 1

Blocked and detailed the Shoulder piece, and added details to the chest. Today I will focus on adding details to the rest of the armor bits and possibly will pose her today.

Update August 31

Adjusted the proportions and added the blockout shapes of the armor parts. Today I will be working on blocking ou...

Welcome Pack Addition - September

Hello everyone!

When I created the welcome pack, I wanted to add one miniature per month from previous releases and make it ever-growing. I am also trying to make time to add a new unseen miniature but, unfortunately, I haven't managed it. 

I won't be adding a miniature to the welcome pack in October, instead, I will add 2 in September. The reason for that is that I want to add...

Loyalty Reward 06 Months - Aorus Windrider & Chimera (WIP)

Hello everyone!

Update August 27

I have finished the body sculpting and added the scales. I also did the details on the head. 

The next step is to add a few small feathers to the head. I will sculpt the Wings and add the remaining feathers after posing.

This is the last WIP on this post, and probably the last time I work on this miniature this month...

The Dark Council - Nyd'la, The Destroyer - Pose 2 (Now available)

Hello everyone!

Nyd'la, The Destroyer is now available on MMF and google Drive.

Printed with a gamer resin using layer 0.02mm on Elegoo Mars 2 pro.

I will now work on a 06 monthly Loyalty reward, for now, it's only in an early stage, but soon I hope to be able to share a WIP with you all. 

Best regards,

Ivo

The Dark Council - Nyd'la, The Destroyer - Pose 2 (Render)

Hello everyone!

Today I have finished the second pose for Nyd'la, The Destroyer, she is now printing.

 I have added a Claw and the Kanabo on the pose. You can mirror the claws or the Kanabo, they are compatible with L/R.

She comes with 2 body options Wing and Wingless, and 2 head options.

She is the last miniature for this month.

Best regards,

The Dark Council - Oxavon, The Devourer (Now available)

Hello everyone,

I have uploaded Oxavon to the MMF store and is now available to you guys. I also uploaded him on GoogleDrive.

He was printed using national gamer resin, layer 0.02mm on Elegoo Mars 2 pro.

I am almost finishing Nyd'la pose 2. I will support and test print today, making her available tomorrow.

Best regards,

Ivo