January models presupported files added !
Added 2021-02-15 07:19:02 +0000 UTCHI Patrons,
I added Sylvanas Windrunner and Spiderman Noir presupported files in your access links :)
Thank you for the patience.
Stay tuned for more awesome art updates :)
Comments
I see Valkyrie Hobby's Int. now has these available as a resin kit, produced with your permission. I hope that's true!
Bill Skoros
2023-01-19 20:32:12 +0000 UTCok see this pic, just opened the stl with lychee: https://flic.kr/p/2kCzbuM . If i slice that i'm pretty sure to get a fail.
frank desprez
2021-02-17 15:30:18 +0000 UTCHi, what file are you printing? I will have a look. Also what error in print have you encountered? Will try my best to support
nomnom
2021-02-17 10:46:45 +0000 UTCok thanks version 1.8+ ? but even without slicing, if i open the toasty_presupported STL file in lychee, it contains errors. Errors that are printed on my mono X. they stay in the anycubic slicer.
frank desprez
2021-02-17 09:22:06 +0000 UTCJoining the discussion as I have a mono X as well. Unfortunately, chitubox files can't be sliced in Lychee, it will give you lots of artefacts. Since January, Chitubox supports now directly the Mono X including slicing, so I recommend to try it out :)
Dianahase
2021-02-17 07:55:48 +0000 UTCmaybe it is just due to my chitubox saving stl method.
frank desprez
2021-02-16 21:51:06 +0000 UTChi, i just imported file into lychee to see errors. I own an anycubic photo mono X and i must use the anycubic slicer. So i open chitubox file with chitubox to save an STL that is readable into the anycubic slicer.
frank desprez
2021-02-16 18:18:47 +0000 UTCQuestion, can i ask why did you imported the print file in lychee? Thanks
nomnom
2021-02-16 18:03:08 +0000 UTCHi, im quite new to lychee, i do use chitubox. Also, all stl are checked in mesh mixer to make sure there will be no error in printing. Have you tried printing directly using the ctb file? Ill have a look on this later and check with u again. Thanks for reaching out :)
nomnom
2021-02-16 17:59:56 +0000 UTChttps://flic.kr/p/2kCgTh8 and https://flic.kr/p/2kChofK
frank desprez
2021-02-16 15:06:58 +0000 UTCHello, i got some trouble printing sylvanas et toasty. Lychee detects some "holes" and i coulnd't repair. I got some cubic pillar instead of support, destroying some details and making some hole to the minis.
frank desprez
2021-02-16 15:05:37 +0000 UTC
