Print Settings for resin!
Added 2020-06-01 18:18:18 +0000 UTCHi guys!
We want to show you the recommended print settings from 3D Support Solutions, our experienced partners who works for other patreons and artist preparing their miniatures for 3D Printing. The settings were tested with different resins and printers.
Comments
Hi there! We use 9/10s for exposure time in our Anycubic Photon using Elegoo Water Washable resin, with 0,05 layer height and 40 for lifting speed. Now that winter is coming, be aware of the room's temperature because it could has a heavy impact in your resin! :)
Highlands_Miniatures
2020-11-21 09:29:26 +0000 UTChave you new parameters for the vampire knights ?
Iscariote XIX
2020-11-21 02:19:45 +0000 UTCIs there a cura profile for FDM printers? Would be nice.
2020-07-06 23:25:45 +0000 UTCHi James! Yes, we've been testing different settings right now, and we noticed that 13secs for exposure time makes the miniatures a little more detailed.
Highlands_Miniatures
2020-06-02 10:18:53 +0000 UTCOoh. 16s is quite long; you're going to get overcured figures and soft detail. I'll try to get some printed on my settings in the next couple of days.
James Edward
2020-06-02 10:05:50 +0000 UTC
