Exclusive: SKULL AXE
Added 2022-09-06 19:33:09 +0000 UTCYou have access to all exclusive models!
- ZOU3D -> ZOU3D - Info and Download Links
If you are new to Patreon!
You can download the files from the link below and on the last day of the month you will receive all the files in your MMF, read the post below to find out the information!
- ZOU3D -> ZOU3D - Info and Download Links
If you were a member and didn't receive the files! send us an email support@zou3d.com !!!
If you have a question, please! Send a message to support@zou3d.com, this is our main communication channel!
We’ll help you! ❤️
Print settings:
Wall line count: 3
Infill: 10%
USE Brim!!!!
Comments
I am sending you the Download link, please check your messages ❤
zou 3d
2023-06-21 14:17:56 +0000 UTCSame. I would really like the stls for this. My girlfriend loved it and make me join for it.=)
Kerry Bonugli
2023-06-21 05:18:13 +0000 UTCI sent you a message with a link to download ❤
zou 3d
2023-06-20 20:05:15 +0000 UTCThis is great! Could I get the file?
2023-06-19 20:20:11 +0000 UTCYou didn't miss it, I'll send you a message 😁
zou 3d
2023-06-16 17:31:17 +0000 UTCHello, don't worry, this design is being updated but I can send it to you, I'll send you a message with the link for you to download it
zou 3d
2023-06-16 17:19:00 +0000 UTCI particularly subscribed for this design, my nephew saw this on Instagram and asked me to print out for him.. Im disappointed
2023-06-16 17:12:38 +0000 UTCI can not believe i missed this! This looks incredible!
Justin Chavez
2023-06-16 05:03:30 +0000 UTCWish this was still available!! );
2023-06-05 02:43:51 +0000 UTCJust printed it 200% and printed slow and steady.
TMad_3D
2022-11-09 01:59:01 +0000 UTCIF your having troubles with this print slow your perimeters speed down the External perimeter speed in particular and use a raft for more stability , it should print great.
William Hargraves
2022-10-23 06:16:24 +0000 UTCI got it to print. I had to increase my minimal layer time to 8 seconds. I was laying one hot layer on top of another causing distortion to the print surface, potentially knocking the print off of the build plate about half way up.
2022-10-17 23:17:42 +0000 UTCRotate it to line up with the Y Axis and use brim or raft
David Petty
2022-10-15 21:53:45 +0000 UTCHey! You can use "Brim" to improve the contact area with the printing plate
zou 3d
2022-10-14 04:41:25 +0000 UTChas anyone had success printing this? i get to like halfway or more up the handle, and then it falls off the build plate, tried twice, second time i slowed it down a bunch, but it still happened? any ideas?
Darrell Atkinson
2022-10-13 06:08:33 +0000 UTC
