Bonus Flexi Factory Mini Spider with Keychain and Magnet Versions!!!
Added 2025-09-27 19:05:47 +0000 UTC*Monthly DOWNLOADS and BONUS Files can be found here. (Scroll down for info and print tips:)
...................................................................................................................................
I hope everyone is having a wonderful weekend!
For this month's Bonus I wanted to squeeze in one last spooky design that is a mini version of my Original Spider from 5 years ago!!! I can't believe I have been designing for this community for 5 years, holy cow π€£ Members get 40% off my Original Spider HERE
If your neighborhood is anything like mine, Halloween is a very big deal and lots of fun. These will great class gifts or non-candy treats. This is print-in-place and works great as a mini, magnet (imbedded) and keychain. But you can also print it big since there is still alot of detail.
- Magnet version is imbedded, so you must slice and add a stop to your machine. Here is a tutorial to show you how: https://www.youtube.com/watch?v=kDyoTGOxb5g&t=7s
- Magnet version can be printed at 100% and uses an 8x3 Magnet or 80% and uses a 6x2 Magnet
Happy Printing -Dan
*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :) To join discord, go to your pinned post and click the Discord Link! HERE
Print Tips:
I test printed between 70% and 100%. The links are small and GREAT bed adhesion is necessary for the tiny legs. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate or Bambulab Supertack
STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
I print with, 15% infill/gyroid, .12 or .16 layer height for quality.
Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List
1st photo is 100% 3mf: Anycubic Orange, Black, Red and Green, Sunlu White, Stronghero Galaxy Mirror Chrome
2nd photo is 100% 3mf Keychain: Ziro Candy Silk and RepRapper Glitter Black
3rd photo is 100% 3mf with 8x3 magnet: Sunlu White, Anycubic Red and Black
4th photo is 80% 3mf with "original spider" 3mf: Stronghero Mirror Chrome, Anycubic Green, Cookiecad Sunrise, TTYT3D Silk Yellow/Green and Flashforge Burnt Titanium.
.....................................................................................................................................All of my Public Releases that are not included this month can be purchased on My Mini Factory or Cults 3d with the 40% off code. See this post for more information: DISCOUNTS Past Exclusives can also be found in this tab. Individual discount codes to buy for $3.99.
Comments
As a member, all you need to do is go to the pinned post right at the top of the page here or the collections tab at the top of the page under discounts and you will see the code to reduce the exclusive designs to $3.99.
Dan
2025-09-30 13:46:40 +0000 UTCTake a look at the infographic in the post for the Brachiosaurus. There are four large longer links and four small shorter links. If you did not print both then your neck is going to curve the wrong direction. You'll need to put the large Links at the base of the neck and then the short links on top of that and it creates the perfect curve up:-)
Dan
2025-09-30 13:46:04 +0000 UTChow to you build the neck on the brachiosaurus mine is going the wrong way
stephen roberts
2025-09-30 13:09:22 +0000 UTCHi sorry I donβt know how else to contact . I want to buy the tattoo orca model but itβs listed as $39.99. Are you able to change to $3.99?
Amanda
2025-09-30 03:52:35 +0000 UTC
