Flexi Factory Imperial Dragon
Added 2022-04-08 18:34:19 +0000 UTCIt was pointed out to me that using some filaments, the horns would sag or curl at the back causing a rough look. This update minimizes that by making them slightly thicker, and putting them at a slightly sharper angle.
Thanks
Included are 4 STL's (use the one that best fits your print bed)
*Flexi Factory Dragon Square Bed_02.stl
(use this for a square print bed...Most Printers)
*Flexi Factory Dragon Wide Bed A_02.stl
(slightly wider...Prusa or similar)
*Flexi Factory Dragon Wide Bed B_02.stl
(even wider...good for Resin Printers)
*Flexi Factory Dragon Printmill_02.stl
(straight version...only good for a printmill)
The head is able to sit up due to interlocking spikes on his back. Once printed be careful not to push the spikes too hard before you learn the proper technique especially with silk PLA, which is more brittle (think slide together rather than press together) They should loosen up as you play with it.
Comments
Good morning. If you go to the pinned post you will see the download section that includes everything that's included for the month, I'm still making files but there's also the full bonus section. For older public releases like the dragon, I do offer the 40% off discount. You can find that in the pinned post under discounts along with the link and code :-)
Dan
2025-02-14 15:33:40 +0000 UTCHello I just sighed up and am new to this, how do I get this file? I saw you said to get it from MMF and when I go there it wants me to purchase it? I saw in other posts there was a discount code or something for it but I cant find it. Can you let me know what it is.
Peter Jordan
2025-02-14 09:07:08 +0000 UTCI test to 50%. Some have made smaller, but great adhesion and quality materials and settings are needed.
Dan
2024-10-06 22:33:38 +0000 UTCHey what's the smallest this can print and still work right?
Nathan Sanders
2024-10-06 22:12:30 +0000 UTCone of my 1st prints on a k5 pro
Hippie
2024-08-30 21:18:20 +0000 UTCThere is no link. This is an older public release that can be purchased with the 405 off discount.
Dan
2024-06-10 17:28:44 +0000 UTCHi, where can I find the download link?
Jakub Dvoลรกk
2024-06-10 16:12:12 +0000 UTCNot yet. I am slowly working on all the older ones. They were not designed for coloring, since the machine did not exist. But I am hoping to have all of them available by the end of the month.
Dan
2023-12-10 17:05:11 +0000 UTCHi Dan, do you have an optimized 3MF version of the dragon to allow for faster coloring of the top spikes? Some parts I am able to easily color using the dropper in Bambu slicer, but other parts not so much. TIA ~Roger
Roger Desilets
2023-11-09 18:22:43 +0000 UTCThe dragon is an older file and you can purchase on MMF with the 40$ discount found in a few posts down. And yes, you can sell any file of mine that you purchase or receive through patreon...as long as you are a member.
Dan
2023-02-09 17:05:57 +0000 UTCHey Bud! i wanted to print these dragons for the comic con ill be attending to. where can i get the files on here? will i still be able to sell them?
Denny Helberg
2023-02-09 14:53:15 +0000 UTCThese are older files available with the 40% off discount on MMF. All the files for October patrons are in the first post labeled October Available Downloads.
Dan
2022-10-17 19:36:56 +0000 UTCis it just me or i can't download these files for some reason?
Farel Zamor
2022-10-17 17:32:29 +0000 UTCHi there. You can go back to MMF and redownload (for free). I always update the files in the platform they sell to have the latest version.
Dan
2022-07-31 13:12:26 +0000 UTCI am new. Where can I download the updated version? I bought the one from MMF and it is the older version. Thanks
WillGonz
2022-07-31 06:47:32 +0000 UTCis this a April exclusive?
Chris
2022-06-23 01:42:11 +0000 UTCyou can reduce the size in the slicer program to reduce size which will reduce print time
David Lyons
2022-05-12 15:00:02 +0000 UTCSorry, just got my printer so relatively new at this. Does it really take 40+ hours to print the dragon? Is there a way to make him smaller? :)
Yul Ka
2022-05-03 16:28:41 +0000 UTCI love this dragon! Much better quality and utility than others I have made. Beautiful!
Paul Robinette
2022-05-02 17:12:57 +0000 UTCPerfect print. Came out great and I love that they have the 2 fused links so it can sit up :)
Joseph Ploettner
2022-04-14 12:14:54 +0000 UTClove it, came out awesome!!
Donnie
2022-04-14 03:42:00 +0000 UTCCame out perfect, printed in color shift yellow pink teal
Raymond Hupko
2022-04-11 23:45:55 +0000 UTCThank you for making the best flexi's, and keeping them up to date.
Anthony Reuter
2022-04-11 02:52:45 +0000 UTCgood luck, let me know how it turns out.
Dan
2022-04-10 13:57:08 +0000 UTCThank You for all your hard work , printing now wish me luck
Raymond Hupko
2022-04-10 00:01:30 +0000 UTCThank You!
Antonia Hernandez (Sheena)
2022-04-08 19:08:46 +0000 UTC๐คฃ
Dan
2022-04-08 19:00:12 +0000 UTCFinal_2!!
Brian Ciampa
2022-04-08 18:51:54 +0000 UTCThank you for continuing to update your files! Even this little change will help a ton. Thank you!
Kyle Sawyer
2022-04-08 18:50:56 +0000 UTCMine were perfect.
Makerworld king
2022-04-08 18:43:54 +0000 UTCOh great!!! Will try this version out!
Ben - FlexiPals
2022-04-08 18:35:20 +0000 UTC
