New Beta Release Start Code P1S and X1C w+w/o AMS

Hi everyone,

I must have put 60 hours into testing and tweaking this over the last week. If you saw me responding to messages at 4 in the morning, yep, that was a testing night!

This release will likely be the final foundation for building the X1C's special features back into the start routine. At this time X1C and P1S with and without AMS have both been well tested but with all beta releases and making changes to SteinSwitches, please proceed with caution on the first few startups especially if you made your own changes to the SteinSwitches.

Here are the features you guys get to work with in this release:

; Default True - 1 low_force_motion_collison_test - avoids potential damage from homing.

; Default True - 2 wipe_before_first_z_touch - Short right-entry wipe cycle with SteinWipe; remotes string from previous print for first Z touch .

; Default False - 3 user_nozzle_inspection - allows 20 seconds before starting a print to clean nozzle.

; Default True - 4 use_modified_nozzle_prime_and_ams_routine - if "true" it allows options 5 - 9 to be used. If "false" it uses the stock routine.

;Default False - 5 scrub_nozzle_before_first_purge - pre filament change scrape on plate. Handy if you do printing with high heat.

; Default False - 6 purge_for_unpulled-back_filament - prevents filament bits sticking to nozzle on swipe if filament pull-back disabled (slicer - machine_end_routine).

;Default True - 7 secondary_nozzle_clean_before_ABL - use SteinWipe + setting 9-10 options after filament change/purge.

;Default True - 8 perform_secondary_nozzle_scrub_before_steinwipe - helps with better bed leveling.

;Default True - 9 steinwipe_aggressive_setting - change secondary wipe speed and extra cycle.

;Default True - 10 mech_test_only_with_bed_cali - vibrate calibration only when "bed leveling" selected in slicer - last saved data used for compensation.

;Default True - 11 mech_test_on_part_center - provides a better calibration for parts off center.

;Default True P1S, False X1C - 12 use_dynamic_bed_probe_routine_every_print - P1 Series FW 01.06.01.02, not avail. for X1C due to X1 FW.

;Default True - 13 use_true_PA_test_line - PA setting only works in Orca. Bambu will purge the line with a setting of zero due to not having the option.

; Default False - 14 use_glacier_plate_prime_location - uses the cut zone for prime.

; Default True - 15 no_strings_to_first_layer - faster travels from prime line to first layer.

As you can imagine there are a lot of different scenarios this unlocks, so if you find one that works for you but have suggestions or problems, Please DM me ASAP so I can address the problem and push immediate updates for others.

Side note: I've been working on the filament change code in between things getting a handle on it and will continue until I have the ready for the next release.

Thank you all for your incredible support ~ Leckiestein