SWMC BBS Pre-release

Hey Tier 2+ members,

I just posted to the #devs channel in Discord, have a look if you want to check out what I've been working on the last month or so. I am aiming to release this at the end of the month. For the moment it's just BBS because Im finding out its easier to work backwards since BBS is very limited in what can be done. T2 and T3 patrons can have first crack at it. There are still a few features I may include but the current lineup of definitions is below. If you need a crash course on how the SteinSwitch Definitions work, this post here goes over it and in the video as well.

Thank you so much for your support!
Leckiestein

```

;BBS_X1_Definitions

;==========================================================

;----------------------LECKIESTEIN-------------------------

;==========================================================

SWMC CoreApr.28.2025

Core Version1

ReleasedApr.30.2025

;______________ BBS X1 Default Definitions __________________

steinwipe_on_initial_startup

chute_tapping_med

swmc_pause_routine

force_spiral_lift_for_pause

use_purge_work_light

z_mirrors_extrusion_length

nozzle_scrape_after_prime

steinwipe_before_abl

link_mech_test_to_bed_level

optimized_travel_to_first_layer

mech_test_on_part_center

steinretraction_max

steinwipe_after_first_layer_scan

override_first_layer_scan_with_swmc

steinwipe_after_timelapse

ooze_prevention_before_flow_cali_scan

use_purge_work_light

;_______________ Global Definitions _______________________

dark_mode ; keeps toolhead light from coming on while printing

use_purge_work_light ; when purging toolhead light help the web cam see better

use_hf_nozzle ; cancels filament stripping measures to allow for high flow nozzles

purge_with_125_percent_flow ; HF only

purge_with_75_percent_flow

purge_with_50_percent_flow

purge_with_25_percent_flow

chute_tapping_soft

chute_tapping_med

chute_tapping_hard

steinretraction_low

steinretraction_med

steinretraction_max

steinwipe_after_timelapse

towerless_smooth_timelapse

steinwipe_every_new_layer

steinwipe_every_other_layer

steinwipe_every_third_layer

steinwipe_every_fourth_layer

steinwipe_at_end_print

;_______________ BBS X1 Startup Definitions ___________________

ignore_fan_cover_alarm ; use for custom fan covers that dont have the magnet for the sensor

inspect_nozzle_at_startup

skip_nozzle_prime ; if using leave_filament_in_end_print this gives the option to skip priming on startup all together

skip_build_plate_detection ; prints the pa line on the build plate qr to prevent next print from starting if not cleared

steinwipe_on_initial_startup ; when machine start the tool will heat and wipe any small string before touching off for Z homing

nozzle_scrape_before_prime

nozzle_scrape_after_prime

purge_sidestepping ; can only be used if printable area is changed in bbs

z_mirrors_extrusion_length

steinwipe_before_abl

link_mech_test_to_bed_level

mech_test_on_part_center

print_pa_line_over_qr

optimized_travel_to_first_layer

disable_printed_cali_lines

steinwipe_after_first_layer_scan

override_first_layer_scan_with_swmc

ooze_prevention_before_flow_cali_scan

steinwipe_after_flow_cali_scan

;_______________ BBS X1 AMS Definitions ________________________

skip_ams ; use if you dont have ams to clean up slicer tool path display

use_pla_supports_for_petg ; extra prime dis-similar material

shrink_purge_size ; break purges up to help prevent chute clogs

ams_steinwipe_detour ; force single wipe after material cut on when tool change

ams_snake_detour ; aims to tuck the small string behind the chute wall by passing over the part of the chute that is lower

ams_reverse_wipe_detour ; enters the chute by backward wiping the nozzle on stock wiper

steinwipe_before_tool_change

steinwipe_after_tool_change

optimize_post_ams_return_print_travel ; be very careful with this option when using multi plates, this variable has a bug that can cause the tool head to travel outside the build vol.

pause_print_for_small_purge_bucket

pause_print_for_med_purge_bucket

pause_print_for_large_purge_bucket

```