Christine

Coming Soon

Hii!!

The carrot egg and its feathery companion are nearly ready! I will see you guys sooooon!!!

🥕🐤🥕

[Exclusive] Ducky Clicker

Hii!!

As I work on the next design I have a fun little clicker drop for you! Sorry for the long post in advance! I am a little nervous releasing clicker designs as they require hardware to function. I did spend sometime trying to figure out a 3d printed clicker but nothing compares to the actual switches and the clicky noise they make.

I tested out about 5 different clicker brands...

[Archived] Pterodactyl Flexi

Hii!!

I am happy to release this little friend to you today! this release includes the pterodactyl flexi, keychain version, and 4 different 3MF versions.

Tested down to 60%, you might notice that the head is a little stiff off the plate at that scale, a gentle tug will release it
Keychains tested down to 80%
the smallest pteros in the pictures are 60% the larges yellow one ...

Coming soon

Hii!!

Another dino drop coming!!! He is almost ready! we will see you guys soooon!!! 🦖🦖

[Exclusive] Sheep Pixie and Clicky Pasture

Haaay!!!!

I have something a little different today! Sheep pixie And clicky pasture! Everything that comes in todays release:

🐑 Sheep Pixie: two versions, Keychain, plus 3MF
🐑 Clicky pasture: with and without clicker prints in parts, plus 3MF
🐑 Hay bale Clicker
🐑 Hay bale Sculpt

The sheep pixie tested from 100% to 150%, I don't recommend going below 100%<...

Trex Update

Hiii!!

I was going to send out a group message regarding this update but patreon is have issues with the messaging system so here we are!

I have added V2 files for the trex flexi so that it can stand up a bit better and sit, as this was frequently requested! I have included V2 3mf files as well. You might notice that I removed the white parts of the eye as I noticed that it doesn'...

[Exclusive] Cookie and Milk Keychains

Hii!! Happy Tuesday! first post of February! yaay!!

I am working on a couple of things! While we wait lets have some milk and cookies!!! Ive included a sculpt version for the cookie and 3mf files! No supports!

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐

I will s...

[Exclusive] Shrimp Flexi and Tank

Hi!!

I am happy to release the shrimp and their home! Everything that is included in this release:

🦐Shrimp Flexi - Two tail versions + Keychains
🦐Shrimp flexi 3MF files
🦐Tank - prints in parts

The shrimp is tested down to 50% with articulation, However I don't recommend going below 80%. I recommend to print with 3 walls, No supports, If you are having adhesion i...

Coming soon

Hiii!!

This release started out with only just a shrimp! But It needed a home! The shrimp and I will see you guys soon!!!

🦐🦐🦐

[Exclusive] Teddy Bear Flexi and Booth

Hiii!!

Teddy bears incoming!! I though I would include different versions so that this release isnt limited to a certain time of year! Everything that is included:

🐻 Teddy bear flexi: 5 different variants
🐻 Teddy bear flexi Keychains
🐻 Booth: prints in 3 parts
🐻 3mf files included

The bears were tested down to 50%! The big single color one in the p...

Coming soon

Hii!!

I am working on a chonky release of some chonky bears! They are almost ready so i'll see you guys sooon!!

🐻🐻🐻

[Exclusive] Heart egg and Cupid Snake Short

hiii!!

I am working on the next release! I should have a sneak peek for you guys tomorrow! In the mean time I've got two exclusives!

The heart egg was requested by a few of you! The egg is a twist closure. I have included a tolerance test for the top of the egg. You can print the bottom and then if you wish print the tolerance test of the top to see if you need to scale the top ...

[Exclusive] Plug and Socket Keychains

Hii!!

I've got something a little different today for valentines day 🫣

The "plug" for a lack of a better term is the male part where the two prongs fit into, I recommend adding a bit of glue to make sure they stay put. The socket is the female part! They do have a difference in tolerance sizes of the holes, the plug has a tighter tolerance than the socket, so make sure you are fi...

[Archived] Cupid Snake Flexi

Hii!! Release day! yaay!!

2025 is the year of the snake, and what valentines day approaching I present the Cupid snake flexi!

 tested down to 50%, I don't recommend going below 60%. The single color in the pictures is 100%, shes a big girl! she fits well on the A1 mini as well when scaled down to 65%, the brown snake in the pictures is 60%

I have included 2 unique 3mf fil...

Coming soon!!

Starting the year off with one of my longest designs yet! She is almost ready to come give you guys a love bite! see you soooon!!!

🐍💖

[Archived] triceratops Flexi and Dino Egg

Its the holidays!!! Yaaay!!

I hope you are all having a wonderful holiday season so far! I wish you and yours the happiest of times, joy, and health!! I hope too that the new year brings you big, great things!

I want you to know that I am deliriously thankful for all the love, encouragement, and support you guys have shared with me. It is in...